Portable Sand Blaster Kit with Replaceable Steel Nozzle - Paint Removal Tool for Air Compressor | Rust & Paint Stripper for Metal, Wood & Concrete Surfaces | DIY Home Renovation & Auto Restoration (Black)

Laser Paint Removal Tool 1. Efficient Use: The operating pressure range is 70‑150 PSI, which enable high working efficiency and even spraying as well. 2. Broad Utility: Suitable for glass etching and the removal of paint, rust, moss, and scale on hot tub, tile and so on. 3. Wide Matching: Allows for a variety of blasting media such as steel grit, glass bead, silicon carbide, alumina and so on. 4. Good for Work: Highly compatible with most air compressor and its components, the sandblaster is very simple to operate. 5. Easy Carrying: Compact size together with light weight largely simplifies the daily storage and carrying for smart working. How to Use: 1. After taking out the product, add an appropriate amount of sand to the product. 2. Use the pneumatic interface to connect the product to a air pump. 3. After starting the air pump, squeeze the product switch. Packing list: 1 x Sandblaster 1 x User Manual Note: 1. When working, do not aim the tool nozzle at any part of people or animals to avoid accidental injury. 2. The product does not have a pneumatic nozzle, you need to buy it yourself. The air inlet thread is 1/4in.​ Spec: Item Type: Sandblaster Operating Pressure Range: 70-150 PSI Operating Average Pressure: 90 PSI Tank Capacity: 600cc, 18 oz. Air Consumption: 7.0scfm, 198l/min No Load Speed: 6000RPM Air Intake: 20 mesh filter, 1/4in Abrasive Size: 46-100 Grit Nozzle Size: 2-15/16in L, 7/32in DIA Spray Hole Diameter: Approx. 5mm / 0.2in