High Pressure PCP Air Compressor 30MPA 4500PSI 300Bar Portable Pump for PCP Rifles - 110V/12V 250W Electric Airgun Charger - Perfect for Hunting, Shooting Sports & Outdoor Adventures

PCP Air Compressor, 30MPA 4500PSI High Pressure Pump Airgun Rifle PCP Air Compressor 110V/12V 300Bar Portable High Pressure Airgun for PCP Rifle, 350W Description Our high-pressure air compressor with a transformer creates an efficient inflation solution designed to meet various inflation needs. The powerful cooling fan, multiple heat dissipation holes, and pressure relief design ensure the safe and stable operation of the machine. Portable design allows it to play an important role in outdoor activities or daily home maintenance, ensuring that the device is always in optimal condition and providing you with convenient and reliable inflation services. Application Our high-pressure air compressor can quickly fill air bottles (up to 1.06 qt capacity). It fits most PCP airguns, air rifles, and paintball HPA tanks (<1.06 qt, e.g. 48/3000, 26/3000, etc.). Intuitive Interface The vehicle-mounted inflating pump is designed with a cooling fan switch and compressor switch, high-pressure air outlet, pressure relief screw, power sockets, AC voltage selector dial (factory default is 110V - located at the bottom of the compressor), temperature display screen, and pressure gauge, which is easy to understand Safe and Reliable A high-power cooling fan (speed: 12500rpm) and multiple cooling holes on the shell can quickly dissipate the heat to ensure stable running and good performance of the machine. The pressure gauge and temperature display allow you to visually monitor the inflation process and avoid safety hazards caused by excessive inflation Portable Design The compact design(11.81*9.84*9.84in) and humanized handle make it easy to carry and store this product and will not occupy much space Package Included 1* Air Compressor 1* Transformer 1* Air Hose 1Pair* Battery Power Cables 1* English Manual All Accessories for Use Specification Color: OrangeProcess: SprayingMaterial: Aluminum, Stainless SteelMount Type: FreestandingAssembly Required: Yes Power Source: Battery PoweredNoise: 75dBPower: 250W Motor Horsepower: 0.75HPCapacity: Less Than 1L/1.06Qt Power Supply: 110V AC/12V Car Battery (40+A)Maximum Air Pressure: 300Bar/4500PSICooling Fan Speed: 12500rpmFilling Speed: 0.5L/0.53Qt, Takes about 18 MinutesConnector Size: 8mm/0.315inAir Compressor Size: 20*17*13.5cm/7.87*6.69*5.31inPackage Size: 30*26*26cm/11.81*10.24*10.24 inNet Weight: 5.2kg/11.46 lbsGross Weight: 7.2kg/15.87 lbs First Use Steps1.Check the AC voltage at the bottom (default 110V).2.Connect the power supply and air hose.3.Turn on the cooling fan.4.Tighten the release valve to the right.5.Set air pressure.6.Start the compressor.7.After inflation, loosen the release valve.8.Disconnect and save. Notes1.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.2.You need to check the air pressure value yourself.3.Please confirm whether there are loose fasteners in various parts before use. Please confirm whether the fan operates normally after the machine is started and whether there are any abnormalities in the sound of the machine, such as friction sound, uneven operation sound, and air leakage sound. 4.You need to manually stop the inflation when the air pressure reaches the set point, when it has been inflated for 25 minutes, or when the temperature reaches 185℉. A beep will sound when inflation is complete. 5.After a full load, please keep the cooling fan running for a few minutes and then manually turn it off. The compressor switch and cooling fan switch need to be pressed briefly, not continuously.6.The process of automotive use is similar to using home, red corresponds to "+" and black corresponds to "-". It is necessary to keep the car started while the compressor is working.